Frame your favorite cup with this Free Crochet Pop-Up Daisy Flower Coaster Pattern featuring white petals and little yellow centers on upright green stems.
Morning coffee feels more inviting with a little color by the cup. With the free crochet pop-up daisy flower coaster pattern, white petals rise on green stems around the drink, leaving the middle open. Tiny yellow centers stand out against the white, and the small leaves give the flowers the look of daisies growing close to the ground. The stems curve in different directions, and the flowers sit at different heights.
Free Crochet Pop-Up Daisy Flower Coaster Pattern
Put it on a breakfast tray with a wide, plain mug and the flower shapes are easy to see from the side. A low cup also leaves the taller daisies in view. On a desk, the little patch of greenery suits a reading spot or a space where you pause for coffee. Turn the coaster so the shortest stems sit near the handle, leaving room for your fingers around the cup.

The colors leave plenty of room to play with a table setting. Cream dishes give the white petals a soft backdrop, while a dark blue mug draws more attention to their shape. For a cheerful breakfast surprise, set the coaster out with a handwritten note and a cup of someone’s usual drink. The view from seat level is where those standing flowers really show.
Behind the Daisy Design
Here, the designer places flowers on upright stems so the details can be seen even when a cup sits in the middle. The project shows the channel’s playful approach to floral home pieces, and the description presents it as suitable for beginners. The coaster comes from Maison Hanin | ميزون حنين.

Crochet Flower Coaster Pattern
This crochet flower coaster combines a sturdy circular base with elegant flower embellishments attached using fishing wire for added structure. Using precise crochet techniques and decorative additions, this project is perfect for enhancing dining setups or as a thoughtful handmade gift.

Skill Level
Intermediate – This pattern requires working in the round, designing petals, creating individual flowers, and combining crochet with structural tools like fishing wire and glue.
Materials
- Yarn:
- Green yarn – for the coaster base.
- White yarn – for the flower embellishments.
- Crochet Hook: 2.5 mm crochet hook.
- Fishing Wire: 0.5 mm thickness, used to structure the flowers.
- Tools:
- Scissors – for trimming yarn and wire.
- Pliers – for shaping and handling fishing wire.
- Adhesive: Glue gun for attaching flower decorations securely.
Stitch Abbreviations
- MR – Magic Ring
- Ch – Chain
- Sl St – Slip Stitch
- DC – Double Crochet
Useful Tips
- Wire Handling: Use pliers carefully to secure and bend the fishing wire without damaging your flowers.
- Tension Control: Maintain consistent tension for a flat coaster base, as variations in stitch tension may warp the shape.
- Precise Flower Placement: Arrange the white flowers symmetrically for a polished look before fixing them with glue.
- Stitch Counting: Verify stitch counts at the end of each round for an even circular base.
- Secure Ends: Properly weave in and trim yarn ends to avoid loose strands.
Pattern Instructions
1. Base of the Coaster
Round 1 – Magic Ring Foundation
- Begin with a MR: Wrap the yarn around your finger to form a loop.
- Work 12 DC into the ring, ensuring even distribution around the circle.
- After finishing the first DC, pull the tail to tighten the ring and close the center gap.

- After finishing the first DC, pull the tail to tighten the ring and close the center gap.
- Join to the first DC with a Sl St to complete the round. Ensure the circle lies flat and smooth.
Round 2 – Expanding the Circle
- Ch 2 to lift the round to DC height.
- Into each stitch from Round 1, work 2 DC (increase stitches).
- Each DC from the previous round will have 2 DC worked into it, doubling the stitch count to 24 DC.
- Join with a Sl St to the first DC to close the round, forming a stable circular base.

Round 3 – Alternating Increases
- Ch 2 to begin.
- Work the following pattern into the round:
- 1 DC in the first stitch, followed by
- 2 DC into the next stitch (increase).
- Repeat this sequence (1 DC, 2 DC) until the round is complete.
- At the end, your stitch count should increase further to 36 DC.
- Join to the first DC with a Sl St to finish the round.

2. Creating the Petals
Attach green yarn to form a petal-like trim around the edge of the base.
Round 4 – Adding Petal Structure
- Begin by attaching green yarn to the outer edge of your coaster base with a Sl St.
- Ch 4 to create the first petal stem.
- Continue the petals by working the following sequence:
- Sl St into the next stitch to secure the chain.
- Ch 4 again to form another petal.
- Repeat this process around the entire circular edge of the coaster to make evenly spaced petal stems.
The green yarn creates a frame for the flower embellishments while resembling a leafy texture.
3. Making the Flower Embellishments
Use white yarn and fishing wire to craft small floral decorations and attach them to the green petal structure.
Steps for White Flowers
- Create individual flower pieces:
- Use small yarn loops combined with Ch stitches and DC clusters to shape small white flowers.
- Each flower should feature layered petals formed by alternating DC and Ch stitches for texture.
- Prepare 0.5 mm fishing wire:
- Cut sections of fishing wire to fit each flower stem length.
- Use pliers to bend and manipulate the wire into stable supports for each flower.

Attaching the Flowers to the Coaster
- Secure flowers onto the green border:
- Position each flower on the green petal stems created in Round 4.
- Use pliers to bind the fishing wire to the petal structure, ensuring clean and professional attachment.
- Repeat for each flower until all the green petal stems have a white flower embellishment.

- Use a glue gun for final fastening:
- Apply a small dab of hot glue to the base of the flowers and press them firmly onto the green border to lock them securely in place.
Final Touches
Inspect the coaster to ensure all flowers are evenly spaced, firmly attached, and centered aesthetically. Trim any excess fishing wire using scissors and weave in any loose yarn ends for a tidy finish.
Measurements
- Coaster Diameter: Approximately 6–8 inches (depending on yarn thickness and tension).
- Flower Size: Small embellishments should be proportional to the coaster base for a balanced look.
Conclusion
This crochet flower coaster uses well-structured techniques to create functional yet decorative tableware. With a sturdy green base, delicate white flowers, and fishing wire adding structure, this project combines traditional crochet with innovative design elements. Suitable for personal use or gifting, its versatility can be further enhanced with color variations or additional embellishments.




